My UPS uses the `usbhid-ups` driver from `driver = "usbhid-ups"`.
For me though _my_ UPS is _not_ listed in the list, however NUT states you can use others devices of similar models from the same manufacturer as long as its uses the same driver.
You can change the `Monitor User` to whatever you want, I kept it default for simplicity.
I highly recommend securing the `Monitor Password` with a lengthy password. Special characters do work, but only tested a few.
The `UPS Mode` should be set to `Master` which means its the server and _not_ the client.
The `port or hosthame` can be just left at `auto`.
Please set an actual shutdown command, all this will do is echo `shutdown` in the console.
For `Auxiliary Parameters` this is what I used:
```text
LISTEN 127.0.0.1 3493
LISTEN 0.0.0.0 3493
```
## WebNUT Installation
- Set `UPS User` to the username defined for the `Monitor User`.
- Set `UPS Password` to the password defined for the `Monitor Password`.
- Set `UPS Host` to the local IP of your server.
- Set `UPS Port` to `3493` which is typically the default port.
In order to access the webGUI, you will **need** to add `ingress` otherwise it will refuse to connect.
