Cloned2Preserve
/
TrueChartsClone
mirror of https://github.com/truecharts/charts.git
1
0
Fork 0
Code
TrueChartsClone/charts/library/common/values.yaml

616 lines
20 KiB
YAML
Raw Blame History

global:
# -- Set an override for the prefix of the fullname
nameOverride:
# -- Set the entire name definition
fullnameOverride:
controller:
# -- enable the controller.
enabled: true
# -- Set the controller type.
# Valid options are deployment, daemonset or statefulset
type: deployment
# -- Set additional annotations on the deployment/statefulset/daemonset
annotationsList: []
# - name: somename
# value: somevalue
# -- Set annotations on the deployment/statefulset/daemonset
annotations: {}
# -- Set additional labels on the deployment/statefulset/daemonset
labelsList: []
# - name: somename
# value: somevalue
# -- Set labels on the deployment/statefulset/daemonset
labels: {}
# -- Number of desired pods
replicas: 1
# -- Set the controller upgrade strategy
# For Deployments, valid values are Recreate (default) and RollingUpdate.
# For StatefulSets, valid values are OnDelete and RollingUpdate (default).
# DaemonSets ignore this.
strategy:
rollingUpdate:
# -- Set deployment RollingUpdate max unavailable
unavailable:
# -- Set deployment RollingUpdate max surge
surge:
# -- Set statefulset RollingUpdate partition
partition:
# -- ReplicaSet revision history limit
revisionHistoryLimit: 3
image:
# -- image repository
repository:
# -- image tag
tag:
# -- image pull policy
pullPolicy:
# -- Override the command(s) for the default container
command: []
# -- Override the args for the default container
args: []
# -- Set additional annotations on the pod
podAnnotationsList: []
# - name: somename
# value: somevalue
#
# -- Set annotations on the pod
podAnnotations: {}
# -- Set additional labels on the pod
podLabelsList: []
# - name: somename
# value: somevalue
# -- Set labels on the pod
podLabels: {}
# -- Add a Horizontal Pod Autoscaler
# @default -- <disabled>
autoscaling:
enabled: false
target: # deploymentname
minReplicas: # 1
maxReplicas: # 100
targetCPUUtilizationPercentage: # 80
targetMemoryUtilizationPercentage: # 80
# -- Create serviceaccount
# @default -- See below
serviceAccount:
# -- Specifies whether a service account should be created
create: false
# -- Annotations to add to the service account
annotations: {}
# -- The name of the service account to use.
# If not set and create is true, a name is generated using the fullname template
name: ""
# -- Create a ClusterRole and ClusterRoleBinding
# @default -- See below
rbac:
# -- Enables or disables the ClusterRole and ClusterRoleBinding
enabled: false
# -- Set Annotations on the ClusterRole
clusterRoleLabels: {}
# -- Set labels on the ClusterRole
clusterRoleAnnotations: {}
# -- Set Annotations on the ClusterRoleBinding
clusterRoleBindingLabels: {}
# -- Set labels on the ClusterRoleBinding
clusterRoleBindingAnnotations: {}
# -- Set Rules on the ClusterRole
rules: {}
# -- Add subjects to the ClusterRoleBinding.
# includes the above created serviceaccount
subjects: {}
# -- Configure networkPolicy for the chart here.
# @default -- See below
networkPolicy:
# -- Enables or disables the networkPolicy
enabled: false
# customizes the podSelector (defaults to the helm-chart selector-labels
# podSelector:
# -- add or remove Policy types
policyTypes: []
# -- add or remove egress policies
egress: []
# -- add or remove egress policies
ingress: []
# -- Use this to populate a secret with the values you specify.
# Be aware that these values are not encrypted by default, and could therefore visible
# to anybody with access to the values.yaml file.
secret: {}
# PASSWORD: my-password
# -- Main environment variables. Template enabled.
# Syntax options:
# A) TZ: UTC
# B) PASSWD: '{{ .Release.Name }}'
# C) PASSWD:
# envFrom:
# ...
env: {}
## Variables with values set from templates, example
## With a release name of: demo, the example env value will be: demo-admin
envTpl: {}
# TEMPLATE_VALUE: "{{ .Release.Name }}-admin"
## Variables with values from (for example) the Downward API
## See https://kubernetes.io/docs/tasks/inject-data-application/environment-variable-expose-pod-information/
envValueFrom: {}
# NODE_NAME:
# fieldRef:
# fieldPath: spec.nodeName
envFrom: []
# - configMapRef:
# name: config-map-name
# - secretRef:
# name: secret-name
# -- Custom priority class for different treatment by the scheduler
priorityClassName: # system-node-critical
# -- Allows specifying a custom scheduler name
schedulerName: # awkward-dangerous-scheduler
# -- Allows specifying explicit hostname setting
hostname:
# -- When using hostNetwork make sure you set dnsPolicy to `ClusterFirstWithHostNet`
hostNetwork: false
# -- Defaults to "ClusterFirst" if hostNetwork is false and "ClusterFirstWithHostNet" if hostNetwork is true.
dnsPolicy: # ClusterFirst
# -- Optional DNS settings, configuring the ndots option may resolve nslookup issues on some Kubernetes setups.
dnsConfig: {}
# options:
# - name: ndots
# value: "1"
# -- Enable/disable the generation of environment variables for services.
# [[ref]](https://kubernetes.io/docs/concepts/services-networking/connect-applications-service/#accessing-the-service)
enableServiceLinks: false
# -- Configure the Security Context for the Pod
podSecurityContext: {}
# -- Configure the Security Context for the main container
securityContext:
privileged: false
readOnlyRootFilesystem: false
allowPrivilegeEscalation: true
# -- Configure the lifecycle for the main container
lifecycle: {}
# -- Specify any initContainers here. Yaml will be passed in to the Pod as-is.
initContainers: []
# -- Specify any additional containers here. Yaml will be passed in to the Pod as-is.
additionalContainers: []
# -- Probe configuration
# -- [[ref]](https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/)
# @default -- See below
probes:
# -- Liveness probe configuration
# @default -- See below
liveness:
# -- Enable the liveness probe
enabled: true
# -- Set this to `true` if you wish to specify your own livenessProbe
custom: false
# -- sets the probe type when not using a custom probe
# @default -- "TCP"
type: TCP
# -- If a HTTP probe is used (default for HTTP/HTTPS services) this path is used
# @default -- "/"
path: "/"
# -- The spec field contains the values for the default livenessProbe.
# If you selected `custom: true`, this field holds the definition of the livenessProbe.
# @default -- See below
spec:
initialDelaySeconds: 2
periodSeconds: 10
timeoutSeconds: 2
failureThreshold: 5
# -- Redainess probe configuration
# @default -- See below
readiness:
# -- Enable the readiness probe
enabled: true
# -- Set this to `true` if you wish to specify your own readinessProbe
custom: false
# -- sets the probe type when not using a custom probe
# @default -- "TCP"
type: TCP
# -- If a HTTP probe is used (default for HTTP/HTTPS services) this path is used
# @default -- "/"
path: "/"
# -- The spec field contains the values for the default readinessProbe.
# If you selected `custom: true`, this field holds the definition of the readinessProbe.
# @default -- See below
spec:
initialDelaySeconds: 2
periodSeconds: 10
timeoutSeconds: 2
failureThreshold: 5
# -- Startup probe configuration
# @default -- See below
startup:
# -- Enable the startup probe
enabled: true
# -- Set this to `true` if you wish to specify your own startupProbe
custom: false
# -- sets the probe type when not using a custom probe
# @default -- "TCP"
type: TCP
# -- If a HTTP probe is used (default for HTTP/HTTPS services) this path is used
# @default -- "/"
path: "/"
# -- The spec field contains the values for the default startupProbe.
# If you selected `custom: true`, this field holds the definition of the startupProbe.
# @default -- See below
spec:
initialDelaySeconds: 3
timeoutSeconds: 2
## This means it has a maximum of 5*30=150 seconds to start up before it fails
periodSeconds: 5
failureThreshold: 60
termination:
# -- Configure the path at which the file to which the main container's termination message will be written.
# -- [[ref](https://kubernetes.io/docs/reference/kubernetes-api/workload-resources/pod-v1/#lifecycle-1)]
messagePath:
# -- Indicate how the main container's termination message should be populated.
# Valid options are `File` and `FallbackToLogsOnError`.
# -- [[ref](https://kubernetes.io/docs/reference/kubernetes-api/workload-resources/pod-v1/#lifecycle-1)]
messagePolicy:
# -- Duration in seconds the pod needs to terminate gracefully
# -- [[ref](https://kubernetes.io/docs/reference/kubernetes-api/workload-resources/pod-v1/#lifecycle)]
gracePeriodSeconds: 10
# -- Configure additional services for the chart here.
# @default -- See below
serviceList: []
# -- Configure the services for the chart here.
# Additional services can be added by adding a dictionary key similar to the 'main' service.
# @default -- See below
service:
main:
# -- Enables or disables the service
enabled: true
# -- Make this the primary service (used in probes, notes, etc...).
# If there is more than 1 service, make sure that only 1 service is marked as primary.
primary: true
# -- Override the name suffix that is used for this service
nameOverride:
# -- Set the service type
type: ClusterIP
annotationsList: []
# - name: somename
# value: somevalue
# -- Provide additional annotations which may be required.
annotations: {}
labelsList: []
# - name: somename
# value: somevalue
# -- Set labels on the deployment/statefulset/daemonset
# -- Provide additional labels which may be required.
labels: {}
# -- Configure additional Service port information here.
# @default -- See below
portsList: []
# -- Configure the Service port information here.
# Additional ports can be added by adding a dictionary key similar to the 'http' service.
# @default -- See below
ports:
main:
# -- Enables or disables the port
enabled: true
# -- Make this the primary port (used in probes, notes, etc...)
# If there is more than 1 service, make sure that only 1 port is marked as primary.
primary: true
# -- The port number
port:
# -- Port protocol.
# Support values are `HTTP`, `HTTPS`, `TCP` and `UDP`.
# HTTPS and HTTPS spawn a TCP service and get used for internal URL and name generation
protocol: HTTP
# -- Specify a service targetPort if you wish to differ the service port from the application port.
# If `targetPort` is specified, this port number is used in the container definition instead of
# the `port` value. Therefore named ports are not supported for this field.
targetPort:
# -- Specify the nodePort value for the LoadBalancer and NodePort service types.
# [[ref]](https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport)
nodePort:
# -- Configure ingressList for the chart here.
# Additional items can be added by adding a items similar to ingress
# @default -- []
ingressList: []
# -- Configure the ingresses for the chart here.
# Additional ingresses can be added by adding a dictionary key similar to the 'main' ingress.
# @default -- See below
ingress:
main:
# -- Enables or disables the ingress
enabled: false
# -- Make this the primary ingress (used in probes, notes, etc...).
# If there is more than 1 ingress, make sure that only 1 ingress is marked as primary.
primary: true
# -- Override the name suffix that is used for this ingress.
nameOverride:
# -- List of middlewares in the traefikmiddlewares k8s namespace to add automatically
# Creates an annotation with the middlewares and appends k8s and traefik namespaces to the middleware names
# Primarily used for TrueNAS SCALE to add additional (seperate) middlewares without exposing them to the end-user
fixedMiddlewares:
- chain-basic
# -- Additional List of middlewares in the traefikmiddlewares k8s namespace to add automatically
# Creates an annotation with the middlewares and appends k8s and traefik namespaces to the middleware names
middlewares: []
annotationsList: []
# - name: somename
# value: somevalue
# -- Provide additional annotations which may be required.
annotations: {}
# kubernetes.io/ingress.class: nginx
# kubernetes.io/tls-acme: "true"
labelsList: []
# - name: somename
# value: somevalue
# -- Set labels on the deployment/statefulset/daemonset
# -- Provide additional labels which may be required.
# -- Provide additional labels which may be required.
labels: {}
# -- Set the ingressClass that is used for this ingress.
# Requires Kubernetes >=1.19
ingressClassName: # "nginx"
## Configure the hosts for the ingress
hosts:
- # -- Host address. Helm template can be passed.
host: chart-example.local
## Configure the paths for the host
paths:
- # -- Path. Helm template can be passed.
path: /
# -- Ignored if not kubeVersion >= 1.14-0
pathType: Prefix
service:
# -- Overrides the service name reference for this path
name:
# -- Overrides the service port reference for this path
port:
# -- Configure TLS for the ingress. Both secretName and hosts can process a Helm template.
tls: []
# - secretName: chart-example-tls
# -- Create a secret from a GUI selected TrueNAS SCALE certificate
# scaleCert: true
# hosts:
# - chart-example.local
# -- Configure persistenceList for the chart here.
# Used to create an additional GUI element in SCALE for mounting USB devices
# Additional items can be added by adding a items similar to persistence
# @default -- []
deviceList: []
# -- Configure persistenceList for the chart here.
# Additional items can be added by adding a items similar to persistence
# @default -- []
persistenceList: []
# -- Configure persistence for the chart here.
# Additional items can be added by adding a dictionary key similar to the 'config' key.
# @default -- See below
persistence:
# -- Default persistence for configuration files.
# @default -- See below
config:
# -- Enables or disables the persistence item
enabled: false
annotationsList: []
# - name: somename
# value: somevalue
# -- Add annotations to PVC object
annotations: {}
labelsList: []
# - name: somename
# value: somevalue
# -- Set labels on the deployment/statefulset/daemonset
# -- Provide additional labels which may be required.
# -- Add labels to PVC object
labels: {}
# -- Sets the persistence type
# Valid options are pvc, emptyDir, hostPath or custom
type: pvc
# -- force the complete PVC name
# Will not add any prefix or suffix
forceName: ""
# -- Where to mount the volume in the main container.
# Defaults to `/<name_of_the_volume>`,
# setting to '-' creates the volume but disables the volumeMount.
mountPath: # /config
# -- Specify if the volume should be mounted read-only.
readOnly: false
# -- Override the name suffix that is used for this volume.
nameOverride:
# -- Storage Class for the config volume.
# If set to `-`, dynamic provisioning is disabled.
# If set to `SCALE-ZFS`, the default provisioner for TrueNAS SCALE is used.
# If set to something else, the given storageClass is used.
# If undefined (the default) or set to null, no storageClassName spec is set, choosing the default provisioner.
storageClass: # "-"
# -- If you want to reuse an existing claim, the name of the existing PVC can be passed here.
existingClaim: # your-claim
# -- Used in conjunction with `existingClaim`. Specifies a sub-path inside the referenced volume instead of its root
subPath: # some-subpath
# mountPropagation: {}
# -- AccessMode for the persistent volume.
# Make sure to select an access mode that is supported by your storage provider!
# [[ref]](https://kubernetes.io/docs/concepts/storage/persistent-volumes/#access-modes)
accessMode: ReadWriteOnce
# -- The amount of storage that is requested for the persistent volume.
size: 1Gi
# - Set to true to retain the PVC upon `helm uninstall`
retain: false
# -- Create an emptyDir volume to share between all containers
# [[ref]]https://kubernetes.io/docs/concepts/storage/volumes/#emptydir)
# @default -- See below
shared:
enabled: false
type: emptyDir
mountPath: /shared
# -- Set the medium to "Memory" to mount a tmpfs (RAM-backed filesystem) instead
# of the storage medium that backs the node.
medium: # Memory
# -- If the `SizeMemoryBackedVolumes` feature gate is enabled, you can
# specify a size for memory backed volumes.
sizeLimit: # 1Gi
# -- Example of a hostPath mount
# [[ref]]https://kubernetes.io/docs/concepts/storage/volumes/#hostpath)
# @default -- See below
host-dev:
enabled: false
type: hostPath
# -- Which path on the host should be mounted.
hostPath: /dev
# -- Where to mount the path in the main container.
# Defaults to the value of `hostPath`
mountPath: # /myDev
# -- Specifying a hostPathType adds a check before trying to mount the path.
# See Kubernetes documentation for options.
hostPathType: ""
# -- Specify if the path should be mounted read-only.
readOnly: true
# -- Example of a custom mount
# @default -- See below
custom-mount:
enabled: false
type: custom
# -- Where to mount the volume in the main container.
# Defaults to `/<name_of_the_volume>`,
# setting to '-' creates the volume but disables the volumeMount.
mountPath: # /custom-mount
# -- Specify if the volume should be mounted read-only.
readOnly: false
# -- Define the custom Volume spec here
# [[ref]](https://kubernetes.io/docs/concepts/storage/volumes/)
volumeSpec: {}
# configMap:
# defaultMode: 420
# name: my-settings
# -- Used in conjunction with `controller.type: statefulset` to create individual disks for each instance.
volumeClaimTemplates: []
# data:
# mountPath: /data
# accessMode: "ReadWriteOnce"
# size: 1Gi
## Or use a list
# - name: backup
# mountPath: /backup
# subPath: theSubPath
# accessMode: "ReadWriteOnce"
# size: 2Gi
# storageClass: cheap-storage-class
# -- Node selection constraint
# [[ref]](https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#nodeselector)
nodeSelector: {}
# -- Defines affinity constraint rules.
# [[ref]](https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#affinity-and-anti-affinity)
affinity: {}
# -- Specify taint tolerations
# [[ref]](https://kubernetes.io/docs/concepts/scheduling-eviction/taint-and-toleration/)
tolerations: []
# -- Use hostAliases to add custom entries to /etc/hosts - mapping IP addresses to hostnames.
# [[ref]](https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/)
hostAliases: []
# - ip: "192.168.1.100"
# hostnames:
# - "example.com"
# - "www.example.com"
# -- Set the resource requests / limits for the main container.
resources: {}
## We usually recommend not to specify default resources and to leave this as a conscious
## choice for the user. This also increases chances charts run on environments with little
## resources, such as Minikube. If you do want to specify resources, uncomment the following
## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
# limits:
# cpu: 100m
# memory: 128Mi
# requests:
# cpu: 100m
# memory: 128Mi
View Git Blame Copy Permalink