[![TrueNAS Scale - Setting up Sandboxes with Jailmaker - YouTube Video](https://img.youtube.com/vi/S0nTRvAHAP8/0.jpg)<br>Watch on YouTube](https://www.youtube.com/watch?v=S0nTRvAHAP8 "TrueNAS Scale - Setting up Sandboxes with Jailmaker - YouTube Video")
Despite what the word 'jail' implies, jailmaker's intended use case is to create one or more additional filesystems to run alongside SCALE with minimal isolation. By default the root user in the jail with uid 0 is mapped to the host's uid 0. This has [obvious security implications](https://linuxcontainers.org/lxc/security/#privileged-containers). If this is not acceptable to you, you may lock down the jails by [limiting capabilities](https://manpages.debian.org/bookworm/systemd-container/systemd-nspawn.1.en.html#Security_Options) and/or using [user namespacing](https://manpages.debian.org/bookworm/systemd-container/systemd-nspawn.1.en.html#User_Namespacing_Options) or use a VM instead.
Beginning with 24.04 (Dragonfish), TrueNAS SCALE includes the systemd-nspawn containerization program in the base system. Technically there's nothing to install. You only need the `jlmkr.py` script file in the right place. [Instructions with screenshots](https://www.truenas.com/docs/scale/scaletutorials/apps/sandboxes/) are provided on the TrueNAS website. Start by creating a new dataset called `jailmaker` with the default settings (from TrueNAS web interface). Then login as the root user and download `jlmkr.py`. If you login as non-root user (e.g. as admin), **you must become root first** by executing `sudo su`.
The `jlmkr.py` script (and the jails + config it creates) are now stored on the `jailmaker` dataset and will survive updates of TrueNAS SCALE. If the automatically created `jails` directory is also a ZFS dataset (which is true for new users), then the `jlmkr.py` script will automatically create a new dataset for every jail created. This allows you to snapshot individual jails. For legacy users (where the `jails` directory is not a dataset) each jail will be stored in a plain directory.
A symlink has been created so you can call `jlmkr` from anywhere (unless the boot pool is readonly, which is the default since SCALE 24.04). Additionally shell aliases have been setup, so you can still call `jlmkr` in an interactive shell (even if the symlink couldn't be created).
After an update of TrueNAS SCALE the symlink will be lost (but the shell aliases will remain). To restore the symlink, just run `./jlmkr.py install` again or use [the `./jlmkr.py startup` command](#startup-jails-on-boot).
Or you can override the default config by using flags. See `jlmkr create --help` for the available options. Anything passed after the jail name will be passed to `systemd-nspawn` when starting the jail. See the `systemd-nspawn` manual for available options, specifically [Mount Options](https://manpages.debian.org/bookworm/systemd-container/systemd-nspawn.1.en.html#Mount_Options) and [Networking Options](https://manpages.debian.org/bookworm/systemd-container/systemd-nspawn.1.en.html#Networking_Options) are frequently used.
In order to start jails automatically after TrueNAS boots, run `/mnt/mypool/jailmaker/jlmkr.py startup` as Post Init Script with Type `Command` from the TrueNAS web interface. This creates the `jlmkr` symlink (if possible), as well as start all the jails with `startup=1` in the config file.
You may want to execute a command inside a jail, for example from a shell script or a CRON job. The example below executes the `env` command inside the jail.
```shell
jlmkr exec myjail env
```
This example executes bash inside the jail with a command as additional argument.
Once you've created a jail, it will exist in a directory inside the `jails` dir next to `jlmkr.py`. For example `/mnt/mypool/jailmaker/jails/myjail` if you've named your jail `myjail`. You may edit the jail configuration file using the `jlmkr edit myjail` command. This opens the config file in your favorite editor, as determined by following [Debian's guidelines](https://www.debian.org/doc/debian-policy/ch-customized-programs.html#editors-and-pagers) on the matter. You'll have to stop the jail and start it again with `jlmkr` for these changes to take effect.
Expert users may use the following additional commands to manage jails directly: `machinectl`, `systemd-nspawn`, `systemd-run`, `systemctl` and `journalctl`. The `jlmkr` script uses these commands under the hood and implements a subset of their functions. If you use them directly you will bypass any safety checks or configuration done by `jlmkr` and not everything will work in the context of TrueNAS SCALE.
By default the jail will have full access to the host network. No further setup is required. You may download and install additional packages inside the jail. Note that some ports are already occupied by TrueNAS SCALE (e.g. 443 for the web interface), so your jail can't listen on these ports. This is inconvenient if you want to host some services (e.g. traefik) inside the jail. To workaround this issue when using host networking, you may disable DHCP and add several static IP addresses (Aliases) through the TrueNAS web interface. If you setup the TrueNAS web interface to only listen on one of these IP addresses, the ports on the remaining IP addresses remain available for the jail to listen on.
See [Advanced Networking](./NETWORKING.md) for more.
Using the [docker config template](./templates/docker/README.md) is recommended if you want to run docker inside the jail. You may of course manually install docker inside a jail. But keep in mind that you need to add `--system-call-filter='add_key keyctl bpf'` (or disable seccomp filtering). It is [not recommended to use host networking for a jail in which you run docker](https://github.com/Jip-Hop/jailmaker/issues/119). Docker needs to manage iptables rules, which it can safely do in its own networking namespace (when using [bridge or macvlan networking](./NETWORKING.md) for the jail).
The rootfs image `jlmkr.py` downloads comes from the [Linux Containers Image server](https://images.linuxcontainers.org). These images are made for LXC. We can use them with systemd-nspawn too, although not all of them work properly. For example, the `alpine` image doesn't work well. If you stick with common systemd based distros (Debian, Ubuntu, Arch Linux...) you should be fine.
To visually distinguish between a root shell inside the jail and a root shell outside the jail, it's possible to colorize the shell prompt. When using a debian jail with the bash shell, you may run the following command to get a yellow prompt inside the jail (will be activated the next time you run `jlmkr shell myjail`):
When in need of help or when you think you've found a bug in jailmaker, [please start with reading this](https://github.com/Jip-Hop/jailmaker/discussions/135).