69 lines
2.9 KiB
Markdown
69 lines
2.9 KiB
Markdown
---
|
|
title: Installing Traefik
|
|
---
|
|
|
|
Within TrueCharts, our aim is to make it as easy as possible to secure your Apps.
|
|
To support this, we supply a separate Traefik "ingress" app, which has been pre-configured to provide secure and fast connections.
|
|
|
|
:::notice
|
|
|
|
The current TrueCharts implementation of Traefik doesn't support TCP/UDP Ingress, only HTTP/HTTPS.
|
|
|
|
:::
|
|
|
|
## How-To
|
|
|
|
### TrueNAS WebUI
|
|
|
|
In order to set up Traefik, you will be required to change the default TrueNAS WebUI access ports.
|
|
These ports are by default set to port `80` for HTTP and port `443` for HTTPS.
|
|
This is necessary as we will be setting Traefik up to function as a reverse proxy, and to receive traffic on these host ports.
|
|
|
|
In the TrueNAS Menu, navigate to **System Settings** > **General**. Click the **Settings** button at the top right of the GUI component.
|
|
Under these **GUI Settings**, change:
|
|
|
|
- Web Interface HTTP Port to port `81`
|
|
- Web Interface HTTPS Port to port `444`.
|
|
|
|
Click **Save** to save your changes. The WebUI will now prompt you to restart the web server service,
|
|
after which you will be automatically redirected to your dashboard through one of the new ports.
|
|
If you are not prompted to restart the web server service, you may restart the machine and manually navigate
|
|
to the WebUI address followed by one of the new ports eg. `truenas.local:81`.
|
|
|
|
:::tip
|
|
|
|
These are the recommended ports for this procedure. Using different ports may require some
|
|
changes to your configuration that are not covered in this tutorial.
|
|
|
|
:::
|
|
|
|
:::caution
|
|
|
|
Do not skip this step. Neglecting to change the default ports active may cause your WebUI to become inaccessible after the following step.
|
|
Ensure you are accessing your WebUI from the new ports before proceeding.
|
|
|
|
:::
|
|
|
|
### Installing the Traefik SCALE App
|
|
|
|
:::note
|
|
|
|
Traefik is part of the `premium` train, so make sure you have it enabled as specified in the [guide](/scale/guides/getting-started/#adding-truecharts).
|
|
|
|
:::
|
|
|
|
In the TrueNAS Menu, navigate to **Apps** > **Discover Apps**. Use the search bar to search for or manually
|
|
find the Traefik app in the list of apps, and click **Install**.
|
|
|
|
The setup of Traefik is relatively straight-forward. Most of the settings remain unchanged from default, except for these two:
|
|
|
|
- **Application Name**: Enter a name for your app. You may use simply _traefik_ for this field.
|
|
- At the bottom, check the warning checkbox.
|
|
|
|
Continue to section 12, and select **Next**. Traefik will now be installed.
|
|
After installation you can access the Traefik dashboard using your host IP address followed by `:9000`, or by simply clicking `Open` on the application's entry under **Apps** > **Installed Applications**.
|
|
|
|
## Video Guide
|
|
|
|
<iframe width="560" height="315" src="https://www.youtube.com/embed/bWNPfrKjawI" title="YouTube video player" frameBorder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowFullScreen></iframe>
|